Root Karbonn Titanium S5 and install ClockworkMod
Hello guyz.....we have came back with another topic on how to root the Karbonn Titanium S5....
Follow these steps-
Option 2:
Download this file here
1.Copy the downloaded image file to the folder in your PC where you have set up ADB and fastboot.
2.Rename the file to recovery.img
3.Turn off your phone. Enter fastboot mode by holding the Power and Volume + button for some time.
4.Release both buttons when you see a green screen on your phone.
5.Plug in the phone to PC using USB cable, wait for the drivers to install and finish setting up.
6.If you are in Windows XP, open command prompt and browse to the folder where you have setup ADB. Or if you are in Windows7/8, hold shift then right click in the ADB folder and click to open command prompt there.
7.Type this in the command prompt :
8.This should display your device name in fastboot mode, if nothing is shown, then you have to check previous steps again.
9.Type this command to flash CWM recovery to your phone :
10.It will show the progress and completion dialogue within seconds when it finishes successfully.
#make sure your device is shown in command prompt
2.copy the boot.img to the fastboot folder
#3.lash the boot sector with the boot image
NOTE-remember the last part of the code may be modiffied according to the boot image name
1. Shut down your phone.
2. Press power button+ volume + button simultaneously for sometime.
3. It will flash some green screen...leave those buttons now.
4. Soon you will be in red screen.
5. after getting into red screen, press home button.
6. You are in clockworkmod recovery.
Follow these steps-
1.Download Framaroot here.
2.Copy it to your SD card
3.Open The file and select “GANDALF Exploit“
4.Now This take few minutes to root your device.How to install CWM in Karbonn titanium S5-
Option 1:1. Download Clockworkmod recovery in Karbonn Titanium S5 and place in SD card.2. Rename it to anything you can remember easily for eg. "recovery". (make sure to add ".img", so it will be "recovery.img".3. Now, install Terminal emulator and install in Karbonn Titanium S5.4. Open it and type "su" and hit enter.5. Now type "dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p13" (note: if you renamed that .img to anything then change the line, "/sdcard/YOUR_RECOVERY_NAME".6. You will see some text flashing on your screen.
7.After process Completion,exit the application.....you have successfully installed CWM on your phone!!Option 2:
Download this file here
1.Copy the downloaded image file to the folder in your PC where you have set up ADB and fastboot.
2.Rename the file to recovery.img
3.Turn off your phone. Enter fastboot mode by holding the Power and Volume + button for some time.
4.Release both buttons when you see a green screen on your phone.
5.Plug in the phone to PC using USB cable, wait for the drivers to install and finish setting up.
6.If you are in Windows XP, open command prompt and browse to the folder where you have setup ADB. Or if you are in Windows7/8, hold shift then right click in the ADB folder and click to open command prompt there.
7.Type this in the command prompt :
Code:
fastboot devices
9.Type this command to flash CWM recovery to your phone :
Code:
fastboot flash recovery recovery.img
FLASHING STOCK BOOT
1.Go to fastboot mode as explained above.#make sure your device is shown in command prompt
Code:
fastboot devices
#3.lash the boot sector with the boot image
Code:
fastboot flash boot boot.img
Code:
fastboot flash boot stockboot.img
Now, to enter in the Clockworkmod recovery-
1. Shut down your phone.
2. Press power button+ volume + button simultaneously for sometime.
3. It will flash some green screen...leave those buttons now.
4. Soon you will be in red screen.
5. after getting into red screen, press home button.
6. You are in clockworkmod recovery.
0 comments