Manually Update Canvas HD To 4.2 Jellybean Official

• Install the drivers
• Unzip the flash tool and the firmware files to separate folders on your PC
• Open flash_tool application from the folder where you have unzipped the flash tool.
• Click on scatter-loading and select the scatter loading file from the unzipped firmware file.
  
• Now, switch off your A116 Canvas HD and keep it switched off.
• Then, go to options in the menu of flash tool and select USB mode.
• After enabling USB mode, go to options again and go to DA Download All under the USB mode click on speed and then click High Speed.
• Now, Go to the Firmware > Upgrade option, click on it then Flash tool will look for your phone.
• NOW, connect your A116 Canvas HD (in switched off state) to your PC. The Flash Tool will start the flashing of your phone and this process can be seen by a colour progress bar present at the bottom of the Flash Tool.
  
• A green ring will be displayed once the process is complete.
  
• Disconnect your phone and remove the battery once and put it again
• Now, switch on your phone and there will be a TP update your phone, DO NOT TOUCH the display during this update. Once finished, you are good to go.

NOTE-WE ARE NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR PHONE.