Root Galaxy Note-II
Requirements:
1-Download these files:
1-CF-Autoroot Depending on your model number which could be found in Setting-> About Phone:
A) For N7100 Model go HERE.
B) For N7105 Model go HERE.
C) SHV-E250K Model go HERE.
D) SHV-E250L Model go HERE.
E) SHV-E250S Model go HERE.
F) SPH-L900 Model go HERE
G) SGH-I317 Model go HERE
H) SGH-I317M Model go HERE
I) SGH-T889 (T-Mobile version) Model go HERE
IF you didn't see your model number above don't try this method because it might brick your phone.2-Odin 3.07 From HERE.
3-Samsung USB Drivers from HERE and then install them.
4-Make sure to backup your EFS file before proceeding.
1:Extract the CF-Autoroot until you got a file with .tar.md5
2: Extract odin307.zip then run Odin3 v3.07 as administrator.
3:Shutdown your Note 2 completely. Then, hold down the volume down button+ the home button then press the power button for 5 seconds, after you will see a warning screen just press volume up.
4: Now click on “PDA” and choose the .tar.md5 file we downloaded earlier. Then connect the USB cable to your computer then to your Galaxy Note 2. Now Click on “Start”.
5: Once it successfully finishes you will see “Pass” in the above table of the “ID:COM”
NOTE-WE ARE NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR PHONE
1-CF-Autoroot Depending on your model number which could be found in Setting-> About Phone:
A) For N7100 Model go HERE.
B) For N7105 Model go HERE.
C) SHV-E250K Model go HERE.
D) SHV-E250L Model go HERE.
E) SHV-E250S Model go HERE.
F) SPH-L900 Model go HERE
G) SGH-I317 Model go HERE
H) SGH-I317M Model go HERE
I) SGH-T889 (T-Mobile version) Model go HERE
IF you didn't see your model number above don't try this method because it might brick your phone.2-Odin 3.07 From HERE.
3-Samsung USB Drivers from HERE and then install them.
4-Make sure to backup your EFS file before proceeding.
1:Extract the CF-Autoroot until you got a file with .tar.md5
2: Extract odin307.zip then run Odin3 v3.07 as administrator.
3:Shutdown your Note 2 completely. Then, hold down the volume down button+ the home button then press the power button for 5 seconds, after you will see a warning screen just press volume up.
4: Now click on “PDA” and choose the .tar.md5 file we downloaded earlier. Then connect the USB cable to your computer then to your Galaxy Note 2. Now Click on “Start”.
5: Once it successfully finishes you will see “Pass” in the above table of the “ID:COM”
NOTE-WE ARE NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR PHONE
0 comments